Debug Ethernet-Controller Ram-Access - Cisco Catalyst 3550 Command Reference Manual

Appendix B Catalyst 3550 Switch Debug Commands

debug ethernet-controller ram-access

Use the debug ethernet-controller ram-access privileged EXEC command to enable debugging of the
driver that controls reads from and writes to the private (not directly accessible by the CPU) RAM
connected to the forwarding application-specific integrated circuits (ASICs). Use the no form of this
command to disable debugging.
Syntax Description This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(4)EA1
Usage Guidelines
The undebug ethernet-controller ram-access command is the same as the no debug
ethernet-controller ram-access command.
Related Commands Command
show debugging
OL-8566-02
debug ethernet-controller ram-access
no debug ethernet-controller ram-access
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
debug ethernet-controller ram-access
Catalyst 3550 Multilayer Switch Command Reference
B-13