Operating Elements In The Workspace - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Basic operation | Working in the workspace
6.4.2

Operating elements in the workspace

Operating elements of the manual measuring function
The operating elements in the workspace are only available if an optical sensor is
active.
Settings
Operating elements of the construction function
The workspace provides operating elements for adjusting the features view.
Zoom to all
Operating elements of the definition function
Depending on the selected geometry, the input fields required for definition are
displayed in the workspace.
Example: Input fields in the workspace for Circle geometry
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Edge detection modes
Zoom to Magnify
selection graphic
Reduce
graphic
6
75