Display - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

15

Display

15.3.3
Parameter
Size of the axis displays
Sounds
15.3.4
The available sounds are grouped into categories. The sounds differ within a
category.
Parameter
Speaker
Speaker volume
Measuring point acquired
Message and Error
Measurement successful
Touch tone
314
Explanation
The size in which the axis positions are displayed in the
workspace can be adjusted in three levels.
Small
Medium
Large
Default setting: Small
Explanation
Use of the built-in speaker on the rear panel of the product
Settings: ON or OFF
Default setting: ON
Volume of the product's speaker
Setting range: 0 % ... 100 %
Default setting: 50 %
Sound to be played after a measuring point was acquired
When you select a setting, the associated sound is played
Settings: Standard, Guitar, Robot, Outer space, No sound
Default setting: Standard
Sound to be played when a message is displayed
When you select a setting, the associated sound is played
Settings: Standard, Guitar, Robot, Outer space, No sound
Default setting: Standard
Sound to be played when the measurement was successful
When you select a setting, the associated sound is played
Settings: Standard, Guitar, Robot, Outer space, No sound
Default setting: Standard
Sound to be played when using a touch element
When you select a setting, the associated sound is played
Settings: Standard, Guitar, Robot, Outer space, No sound
Default setting: Standard
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Settings | General