Quick Start | Conducting a measurement
Aligning the measured object
Before you can evaluate the measuring points, you need to align the measured
object. During this process, the coordinate system of the measured object
(workpiece coordinate system) is determined, which is specified in the technical
drawing.
This makes it possible to compare the measured values with the data in the
technical drawing and assess them.
Measured objects are usually aligned in three steps:
1 Measuring the alignment
2 Measuring a straight line
3 Constructing the zero point
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
9
161