Magnifications - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

15
Parameter
Master gain
Red gain
Green gain
Blue gain
Exposure time (µs)
15.5.2

Magnifications

For each optical magnification available on the measuring machine, a Magnification
must be set up on the product.
Parameter
Magnifications
Default magnification:
VED Zoom 1
320
Explanation
The camera sensor outputs a voltage in proportion to
the amount of incident light. If you want to increase
image brightness and contrast, you can use analog
gain to increase this voltage before digitizing. The
Master gain leads to an increase in the overall
brightness of the resulting image and improves the
contrast.
Master gain for increasing brightness and contrast
Setting range: 1 % ... 100 %
Comparable with Master gain, Red gain can be used
for setting the gain for this color value.
Red gain for increasing brightness and contrast
Setting range: 1 % ... 100 %
Comparable with Master gain, Green gain can be
used for setting the gain for this color value.
Green gain for increasing brightness and contrast
Setting range: 1 % ... 100 %
Comparable with Master gain, Blue gain can be used
for setting the gain for this color value.
Blue gain for increasing brightness and contrast
Setting range: 1 % ... 100 %
Length of time during which the light for image acquisition can
reach the sensor
Setting range: Depending on connected camera
Explanation
Definition of the respective magnifications
Entry for Description and Acronym for quick access menu:
At least one character
Default setting: VED Zoom 1 and VZ1
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Settings | Video edge detection (VED)