HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 78

6
Operating
element
1
5
78
Short description
Features preview
The features preview is only available in the measuring
function.
The features preview displays a reduced view of the
measured, constructed and defined features. The current
image section of the live image is highlighted.
To display the features preview in the workspace, tap
Features preview
The features preview is displayed in the workspace
The current content of the workspace switches to the
Inspector
Live image preview
The live image preview is only available in the manual
measuring function.
The live image preview displays a reduced view of the live
image. The live image preview is shown if the position
preview or the features preview is displayed in the
workspace.
To display the live image preview in the workspace, tap
Live image preview
The live image preview is displayed in the workspace
The current content of the workspace switches to the
Inspector
Feature list
2
The feature list contains a list of all features that have been
measured, constructed or defined. The feature list provides
the following information:
1: Measured feature with symbol, name and
4 3
consecutive number
2: Function that was used for creating the feature
3: Concludes the measuring point acquisition
4: Number of measuring points that have been acquired
5: Newly acquired feature with symbol
Each feature contains details on the measurement results
as well as selectable tolerances.
To adjust the tolerances and display the measured
values, drag a feature into the workspace
To delete a feature, drag the feature to the right out of
the Inspector
Basic operation | Using the Inspector
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016