HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 239

Measurement | Constructing features
Editing a constructed feature
The constructed features can be edited immediately after construction. Depending
on the geometry and the parent features, you can change the construction type of
a constructed feature.
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Drag the constructed feature from the feature list into the
workspace
The Details dialog appears with the Overview tab selected
To rename the feature, tap the input field containing the
current name
Enter a name for the feature
Confirm entry with RET
The new name is displayed in the feature list
To change the construction type of the feature, select
the type you want to use for the construction in the
Construction type drop-down list
The available construction types depend on the
geometry and the parent features.
Further information:
types", page 212
The new construction type is applied
To change the geometry type, select the desired geometry
type in the New type of geometry drop-down list
The feature is displayed in the new form
Tap Close to close the dialog
"Overview of construction
10
239