HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 125

Commissioning | Commissioning steps
Lighting configurations
The range of lighting functions depends on the lighting unit of the connected
measuring machine.
The product supports the following configurations:
A transmitted light + 4 x AD reflected light
A trans.light + 4 x A refl.light + D laser pointer
Further information:
Setting the lighting configuration A transmitted light + 4 x AD reflected light
Further information:
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
"Lighting", page 321
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Lighting
The list of available lighting configurations is displayed
Tap A transmitted light + 4 x AD reflected light
If necessary, tap Activate to activate an inactive lighting
Select the desired analog output in the Analog output for
transmitted light drop-down list
Select the desired analog output in the Analog output for
reflected light drop-down list
Select the desired digital output in the Digital output for
front segment drop-down list
Select the desired digital output in the Digital output for
rear segment drop-down list
Select the desired digital output in the Digital output for left
segment drop-down list
Select the desired digital output in the Digital output for
right segment drop-down list
The lighting can now be adjusted with the lighting palette.
"Lighting", page 321
7
125