HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 180

9
Converting a feature
The feature can be converted to a different type of geometry. The list of possible
geometry types is provided as a drop-down list in the features view.
Adjusting tolerances
To set tolerances for the measured geometry, enter the tolerance values on the
Tolerances tab.
Further information:
Activation
180
Drag the feature from the feature list into the workspace
The Details dialog appears with the Overview tab selected
The geometry type of the feature is displayed
Select the desired geometry type in the New type of
geometry drop-down list
The feature is displayed in the new form
Further information: "Display of measuring points and form",
page 247
Tap Close to close the dialog
"Defining tolerances", page 252
Tap Measure in the main menu
The user interface for measuring, constructing and defining
appears
Drag the feature from the feature list into the workspace
The Details dialog appears with the Overview tab selected
Tap the Tolerances tab
The tab for tolerancing the selected feature is displayed
Quick Start | Conducting a measurement
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016