Backing Up And Restoring The Configuration - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

15

15.10.2 Backing up and restoring the configuration

Backing up the configuration
The configuration of the product can be backed up as a file to make it available
after a reset to the factory default settings or for installation on multiple products.
Performing a complete backup
During a complete backup of the configuration, all settings of the product are
backed up.
Safely removing a USB mass storage device
346
Tap Settings in the main menu
Open in the sequence
Service
Backup and restore configuration
Backup configuration
Tap Complete backup
If required, connect a USB mass storage device to a USB
port of the product
Select the folder to which you want to copy the configuration
data
Specify a name for the configuration data,
e.g. "<yyyy-mm-dd>_config"
Confirm entry with RET
Tap OK
Confirm the successful backup of the configuration
The configuration file was backed up
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
Disconnect the USB mass storage device
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Settings | Service