HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 121

Commissioning | Commissioning steps
Activating the virtual camera
To try out examples described in these instructions, you can activate a virtual
camera. When you use the virtual camera, an image of the 2-D demo part is
displayed in the live image.
Replacing the live image of the virtual camera
When you use a virtual camera, an image is displayed in the workspace. You can
replace this image with an image of your choice, provided that a geometry in that
image is known and can be used for determining the pixel size.
Only images in the PNG and JPG file formats and with an image size of
1280 px x 1024 px can be displayed.
Further information:
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Camera
The list of available cameras is displayed
Tap the virtual camera you want to use
Tap Activate first, if necessary, to activate an inactive camera
The camera is activated
Tap Settings in the main menu
Tap Sensors
Open in the sequence
Video edge detection (VED)
Camera
The list of available cameras is displayed
Tap the virtual camera you want to use
Tap Activate first, if necessary, to activate an inactive camera
To select the source for the image displayed in the
workspace, tap Image directory
Select the folder and confirm with OK
The image stored in the selected folder is displayed in the
workspace
"Camera", page 318
7
121