Overview - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

8
8.1

Overview

During setup, the setup engineer (Setup) configures the product for use with the
measuring machine in the respective measurement applications. This includes
setting up operators, defining measurement report templates, and creating
measuring programs.
Backing up the configuration
To back up the settings, you can back up the configuration data after
commissioning or setup. These configuration data can be reused for equivalent
products.
Before the backed-up configuration data can be restored to a product, the software
options that were active during the backup must be activated on the respective
product.
Further information:
134
Make sure that you have read and understood the "Basic Operation"
chapter before performing the activities described below.
Further information: "Basic operation", page 51
The following steps must be performed only by qualified personnel.
Further information: "Personnel qualification", page 19
"Backing up and restoring the configuration", page 346
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Setup | Overview