HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 41

Installation | Product overview
Connections that depend on software options:
1 Connections for optical edge detector for point measurement
X107: Reference input for optical waveguide from the light source
X108: Input for optical waveguide from the projection screen
2 X102: 37-pin D-sub connection for digital TTL interface (8 inputs, 16 outputs)
3 X112: 15-pin D-sub connection for touch probes (e.g. HEIDENHAIN touch
probe)
8 RJ45 Ethernet connections
X117: Connection for digital camera
9 X103: 37-pin D-sub connection for digital or analog interface (TTL 4 inputs,
6 outputs; analog 3 inputs, 10 outputs)
10 X104: 9-pin D-sub connection for universal relay interface (2x relay
changeover contacts)
Left side panel
12 X31 (below protective cover):
Hi-Speed USB 2.0 port (Type A) for printer or USB mass storage device
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
5
41