HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 247

Measurement evaluation | Evaluating a measurement
Short description
1 Name of the feature
2 Axis positions of the center point
3 Feature properties and parameters
4 Features view of the measuring points and the form
The Overview shows the following details about the feature:
Name of the feature
Axis positions of the center point
Feature parameters, depending on the type of geometry
Number of measuring points used for calculating the feature
Fitting algorithm used for calculating the feature (depending on the geometry
and the number of measuring points)
List of geometry types to which the feature can be converted
Display of measuring points and form
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
4
The measuring points with the greatest deviations
within the fitting algorithm are displayed in red
The measuring points that are not used for the fitting
algorithm according to the measuring point filter
settings are displayed in gray
The measuring points used for the fitting algorithm are
displayed in white
The distances between the measuring points and the
calculated form are displayed as lines
1 2
3
11
247