Oem Area; Adding The Oem Documentation - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

7
7.4

OEM area

The OEM area enables commissioning engineers to install custom information in
the product:
Documentation: OEM documentation, e.g. service information
Opening screen: Adjustment of the startup screen, e.g. to display the OEM's
company logo
7.4.1

Adding the OEM documentation

Safely removing a USB mass storage device
130
Only documents in PDF format can be added. Other documents are not
displayed.
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
Documentation
Add OEM service info
If required, connect a USB mass storage device to a USB
port of the product
To navigate to the desired file, tap the location where the file
is stored
If you have accidentally tapped the wrong folder,
you can return to the previous folder. Tap the file
name that is displayed above the list.
Navigate to the folder containing the file
Tap the file name
Tap OK
The document is copied to the product and displayed in the
service information area
Confirm the successful transfer with OK
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
Disconnect the USB mass storage device
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Commissioning | OEM area