HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual page 301

Measurement report | Creating and editing a template
Form field
Tolerance type
Tolerance state
Nominal dimension
Actual value
Deviation
Lower tolerance
Upper tolerance
Lower limit
Upper limit
Trend [-/+++]
Reference, bonus
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
Meaning and application
The tolerance types applied to the feature are
inserted.
The states of the tolerances applied to the feature
are inserted.
The nominal dimension of a tolerance applied to
the feature is inserted.
The actual dimension of a tolerance applied to the
feature is inserted.
The difference between nominal dimension and
actual dimension is inserted.
The lower tolerance limit of a tolerance applied to
the feature is inserted.
The upper tolerance of a tolerance applied to the
feature is inserted.
The lower limit of a tolerance applied to the feature
is inserted.
The upper limit of a tolerance applied to the feature
is inserted.
The trend of the deviation is inserted.
The tolerance zone is divided into seven segments.
The result is assigned to the corresponding
segment. The corresponding segment is shown as
a trend:
Segment -3: ---
Segment -2: --
Segment -1: -
Segment 0: .
Segment +1: +
Segment +2: ++
Segment +3: +++
The reference feature of a tolerance applied to the
feature is inserted.
If a material requirement is being used, the exist-
ing tolerance bonus is inserted.
13
301