Mounting On Multi-Pos Holder - HEIDENHAIN QUADRA-CHEK 3000 Operating Instructions Manual

Mounting | Assembly of the device
4.2.3

Mounting on Multi-Pos holder

Use the four supplied M4 x 8 ISO 14581 (black) countersunk screws for
attachment to the threaded holes on the rear panel. The permissible tightening
torque is 2.5 Nm.
You can tilt the holder to any angle within the 90° tilt range. The recommended
tightening torque for the T25 screw is 5.0 Nm. The maximum permissible
tightening torque for the T25 screw is 15.0 Nm.
The cables are routed together through the opening in the holder from behind and
then laterally to the connections.
Dimensions of the Multi-Pos holder
Md = 15 Nm max. 1
HEIDENHAIN | QUADRA-CHEK 3000 | Operating Instructions | 6/2016
80
T25
135
152
2
10
113
2
4
35