The Paper Trays; The Electrical Module; The Dry Ink Cartridge; The Photoreceptor - Xerox DocuTech 6100 Operator's Manual

System components

The paper trays

The electrical module

The dry ink cartridge

The photoreceptor

4-6
8. Decurler lever
9. Dry Ink Waste container
There are three paper trays which can hold different sizes, types,
and colors of stock for printing jobs. Paper tray capacities are as
follows:
Tray 1: 1,100 sheets of substance 20 (75 g/m2)
Tray 2: 600 sheets of substance 20 (75 g/m2)
Tray 3: 2,600 sheets of substance 20 (75 g/m2)
The system circuit breakers are located behind the door of the
electrical module. To remove all power from the printer, all three
circuit breakers must be in the down position. For the printer to
operate properly, all three circuit breakers must be in the up
position.
Dry ink is the material that forms the black image on prints. Dry
ink is contained in the dry ink cartridge. When directed by a
message on the controller, you must replace the dry ink
cartridge.
For dry ink cartridge replacement, refer to the "Routine
maintenance" chapter.
In the xerographic process, the image to be printed is first
developed on the photoreceptor. When print stock is brought
into contact with the photoreceptor, the image is transferred to
the print stock.
DocuTech 61xx Operator Guide