Learned Port Security Specifications; Learned Port Security Defaults; Chapter 3 Configuring Learned Port Security - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Learned Port Security Specifications

Learned Port Security Specifications
RFCs supported
IEEE Standards supported
Ports eligible for Learned Port Security
Ports not eligible for Learned Port Security
Minimum number of learned MAC addresses
allowed per port
Maximum number of learned MAC addresses
allowed per port
Maximum number of configurable MAC address
ranges per LPS port.
Maximum number of learned MAC addresses per
switch
Maximum number of learned MAC addresses total
for a stack of switches

Learned Port Security Defaults

Parameter Description
LPS status for a port.
Number of learned MAC addresses
allowed on an LPS port.
Source learning time limit.
Configured MAC addresses per LPS
port.
MAC address range per LPS port.
LPS port violation mode.
page 3-2
Not applicable at this time.
Not applicable at this time.
Ethernet and gigabit Ethernet ports (fixed, mobile,
802.1Q tagged, and authenticated ports).
Link aggregate ports.
802.1Q (trunked) link aggregate ports.
1
100
1
8K
8K
Command
port-security
port security maximum
port-security shutdown
port-security mac
port-security mac-range
port-security violation
OmniSwitch 6800 Series Network Configuration Guide
Configuring Learned Port Security
Default
disabled
1
disabled
none
00:00:00:00:00:00–
ff:ff:ff:ff:ff:ff
restrict
November 2004