Configuring Vlans; Vlan Specifications; Vlan Defaults - Alcatel OmniSwitch 6800 Series Network Configuration Manual

VLAN Specifications

VLAN Specifications
RFCs Supported
IEEE Standards Supported
Maximum VLANs per stack
Maximum VLAN port associations per
switch or stack
Maximum IP router port VLANs per switch
or stack
Maximum IPX router port VLANs per switch
or stack
Maximum Spanning Tree VLANs per switch
or stack
Maximum authenticated VLANs per switch
or stack
MAC Router Mode Supported
CLI Command Prefix Recognition

VLAN Defaults

Parameter Description
VLAN identifier (VLAN ID)
VLAN administrative state
VLAN description
VLAN Spanning Tree state
VLAN mobile tag status
VLAN IP router port
VLAN IP router MTU size
VLAN authentication status
VLAN port associations
page 4-2
2674 - Definitions of Managed Objects for Bridges
with Traffic Classes, Multicast Filtering and Virtual
LAN Extensions
802.1Q - Virtual Bridged Local Area Networks
802.1D - Media Access Control Bridges
1024 (including default VLAN 1)
32768
1024
0 (IPX routing not supported in this release)
254
128
Single
All VLAN management commands support prefix
recognition. See the "Using the CLI" chapter in the
OmniSwitch 6800 Switch Management Guide for
more information.
Command
vlan
vlan
vlan name
vlan stp
vlan mobile-tag
vlan router ip
vlan mtu-ip
vlan authentication
vlan port default
OmniSwitch 6800 Series Network Configuration Guide

Configuring VLANs

Default
VLAN 1 predefined on each
switch.
Enabled
VLAN identifier (VLAN ID)
Enabled (Disabled if VLAN
count exceeds 254)
Disabled
No router port defined.
1500 bytes
Disabled
All ports initially associated
with default VLAN 1.
November 2004