Displaying Health Threshold Limits - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Monitoring Switch Health

Displaying Health Threshold Limits

The show health threshold
as individual thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage, CPU usage
and chassis temperature.
To view all health thresholds, enter the following command:
-> show health threshold
Rx Threshold
TxRx Threshold
Memory Threshold
CPU Threshold
Temperature Threshold
To display a specific health threshold, enter the show health threshold command, followed by the appro-
priate suffix syntax:
rx
•
txrx
•
memory
•
cpu
•
temperature
•
For example, if you want to view only the health threshold for memory usage, enter the following
command:
-> show health threshold memory
Memory Threshold
Note. For detailed definitions of each of the threshold types, refer to
ture Thresholds" on page
OmniSwitch CLI Reference Guide.
page 24-26
command is used to view all current health thresholds on the switch, as well
= 80
= 80
= 80
= 80
= 60
= 80
24-25, as well as Chapter 35, "Health Monitoring Commands,"
OmniSwitch 6800 Series Network Configuration Guide
Diagnosing Switch Problems
"Configuring Resource and Tempera-
in the
November 2004