Defining Vlan Rules; Vlan Rules Specifications; Vlan Rules Defaults - Alcatel OmniSwitch 6800 Series Network Configuration Manual

VLAN Rules Specifications

VLAN Rules Specifications
IEEE Standards Supported
Maximum number of VLANs per switch
Maximum number of rules per VLAN
Maximum number of rules per switch
Switch ports eligible for VLAN rule classifi-
cation (dynamic VLAN assignment)
Switch ports not eligible for VLAN rule
classification
CLI Command Prefix Recognition

VLAN Rules Defaults

Parameter Description
IP network address rule subnet mask
IPX network address rule encapsulation
page 7-2
802.1Q–Virtual Bridged Local Area Networks
802.1v–VLAN Classification by Protocol and Port
802.1D–Media Access Control Bridges
1024
Unlimited
8129 of each rule type, except for a DHCP generic
rule because only one is allowed per switch.
Mobile 10/100 Ethernet and gigabit ports.
Non-mobile (fixed) ports.
Uplink/stack ports.
10 gigabit ports.
802.1Q tagged fixed ports.
Link aggregate ports.
All VLAN management commands support prefix
recognition. See the "Using the CLI" chapter in the
OmniSwitch 6800 Switch Management Guide for
more information.
Command
vlan ip
vlan ipx
OmniSwitch 6800 Series Network Configuration Guide

Defining VLAN Rules

Default
The IP address class range;
Class A, B, or C.
Ethernet-II
November 2004