Verifying The Rdp Configuration - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Configuring RDP

Verifying the RDP Configuration

To display information about the RDP configuration on the switch, use the show commands listed below:
show ip router-discovery
show ip router-
discovery interface
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show ip router-discovery and show ip router-discovery
interface commands is also given in
OmniSwitch 6800 Series Network Configuration Guide
Displays the current operational status of RDP on the switch. Also
includes the number of advertisement packets transmitted and the num-
ber of solicitation packets received by all RDP interfaces on the switch.
Displays the current RDP status, related parameter values, and RDP
traffic statistics for one or more switch router RDP interfaces.
"Quick Steps for Configuring RDP" on page
November 2004
Verifying the RDP Configuration
14-3.
page 14-11