Alcatel OmniSwitch 6800 Series Network Configuration Manual page 502

Monitoring Switch Health
The following sections include a discussion of CLI commands that can be used to configure resource
parameters and monitor or reset statistics for switch resources. These commands include:
health threshold—Configures threshold limits for input traffic (RX), output/input traffic (TX/RX),
•
memory usage, CPU usage, and chassis temperature. See
show health threshold—Displays current health threshold settings. See
•
health interval—Configures sampling interval between health statistics checks. See
•
more information.
show health interval—Displays current health sampling interval, measured in seconds. See
•
24-27 for details.
show health —Displays health statistics for the switch, as percentages of total resource capacity. See
•
page 24-28 for more information.
health statistics
•
page 24-24
reset—Resets health statistics for the switch. See
OmniSwitch 6800 Series Network Configuration Guide
Diagnosing Switch Problems
page 24-25 for more information.
page 24-26
page 24-29 for details.
for details.
page 24-27 for
page
November 2004