Relationship To Other Features - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Configuring Dynamic Link Aggregation

Relationship to Other Features

Link aggregation groups are supported by other switch software features. For example, you can configure
802.1Q tagging on link aggregation groups in addition to configuring it on individual ports. The following
features have CLI commands or command parameters that support link aggregation:
VLANs. For more information on VLANs see
•
802.1Q. For more information on configuring and monitoring 802.1Q see
•
802.1Q."
Spanning Tree. For more information on Spanning Tree see
•
Parameters."
Note. See "Application Examples" on page 11-29
features.
OmniSwitch 6800 Series Network Configuration Guide
Dynamic Link Aggregation Overview
Chapter 4, "Configuring VLANs."
Chapter 5, "Configuring Spanning Tree
for tutorials on using link aggregation with other
November 2004
Chapter 9, "Configuring
page 11-9