Alcatel OmniSwitch 6800 Series Network Configuration Manual page 228

Displaying Dynamic Link Aggregation Configuration and Statistics
A screen similar to the following would be displayed:
Dynamic Aggregable Port
SNMP Id
Slot/Port
Administrative State
Operational State
Port State
Link State
Selected Agg Number
Primary port
LACP
Actor System Priority
Actor System Id
Actor Admin Key
Actor Oper Key
Partner Admin System Priority
Partner Oper System Priority
Partner Admin System Id
Partner Oper System Id
Partner Admin Key
Partner Oper Key
Attached Agg Id
Actor Port
Actor Port Priority
Partner Admin Port
Partner Oper Port
Partner Admin Port Priority
Partner Oper Port Priority
Actor Admin State
Actor Oper State
Partner Admin State
Partner Oper State
Note. See the "Link Aggregation Commands" chapter in the OmniSwitch CLI Reference Guide for
complete documentation of show commands for link aggregation.
page 11-34
: 2001,
: 2/1,
: ENABLED,
: DOWN,
: CONFIGURED,
: DOWN,
: NONE,
: UNKNOWN,
: 10,
: [00:d0:95:6a:78:3a],
: 8,
: 8,
: 20,
: 20,
: [00:00:00:00:00:00],
: [00:00:00:00:00:00],
: 8,
: 0,
: 0,
: 7,
: 15,
: 0,
: 0,
: 0,
: 0,
: act1.tim1.agg1.syn0.col0.dis0.def1.exp0
: act1.tim1.agg1.syn0.col0.dis0.def1.exp0,
: act0.tim0.agg1.syn1.col1.dis1.def1.exp0,
: act0.tim0.agg1.syn0.col1.dis1.def1.exp0
OmniSwitch 6800 Series Network Configuration Guide
Configuring Dynamic Link Aggregation
November 2004