Switch Logging Specifications - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Switch Logging Specifications

Switch Logging Specifications
Functionality Supported
Functionality Not Supported
Logging Devices
Application ID Levels Supported
Severity Levels/Types Supported
page 25-2
High level event logging mechanism that for-
wards requests from applications to enabled
logging devices.
Not intended for debugging individual hardware
applications
Flash Memory/Console/IP Address
IDLE (255), DIAG (0), IPC-DIAG (1),
QDRIVER (2), QDISPATCHER (3), IPC-LINK
(4), NI-SUPERVISION (5), INTERFACE (6),
802.1Q (7), VLAN (8), GM (9), BRIDGE (10),
STP (11), LINKAGG (12), QOS (13), RSVP
(14), IP (15), IPMS (17), AMAP (18), GMAP
(19), AAA (20), IPC-MON (21), IP-HELPER
(22), PMM (23), MODULE (24), EIPC (26),
CHASSIS (64), PORT-MGR (65), CONFIG
(66), CLI (67), SNMP (68), WEB (69), MIPGW
(70), SESSION (71), TRAP (72), POLICY (73),
DRC (74), SYSTEM (75), HEALTH (76),
NAN-DRIVER (78), RMON (79), TELENET
(80), PSM (81), FTP (82), SNMI (83), DIS-
TRIB (84), EPIL0GUE (85), LDAP (86), NOS-
NMP (87), SSL (88), DBGGW (89),
LANPOWER (108)
2 (Alarm - highest severity), 3 (Error),
4 (Alert), 5 (Warning) 6 (Info - default),
7 (Debug 1), 8 (Debug 2), 9 (Debug 3 - lowest
severity)
OmniSwitch 6800 Series Network Configuration Guide
Using Switch Logging
November 2004