Qos Port Defaults; Policy Rule Defaults - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Configuring QoS

QoS Port Defaults

Use the qos port reset
Description
The default 802.1p value
inserted into packets received on
untrusted ports.
The default DSCP value inserted
into packets received on
untrusted ports.
Whether the port uses strict pri-
ority or weighted fair queuing.
Whether the port is trusted or
untrusted
Maximum bandwidth

Policy Rule Defaults

The following are defaults for the
Description
Policy rule enabled or disabled
Determines the order in which
rules are searched
Whether the rule is saved to
flash immediately
*However, policy rules configured with source and destination conditions and actions with disposi-
tion, priority, or 802.1P configured are automatically bidirectional.
OmniSwitch 6800 Series Network Configuration Guide
command to reset port settings to the defaults.
Command/keyword
qos port default 802.1p
qos port default dscp
qos port servicing mode
qos port trusted
qos port maximum bandwidth
policy rule command:
Keyword
enable | disable
precedence
save
Default
0
0
strict priority queuing
802.1Q and mobile ports are
always trusted; other ports are
untrusted
port bandwidth
Default
enabled
0
Save option is enabled.
November 2004
QoS Defaults
page 21-9