Modifying The Maximum Ingress Bandwidth; Configuring The Maximum Ingress Bandwidth; Restoring The Maximum Ingress - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Modifying IPMS Parameters

Modifying the Maximum Ingress Bandwidth

The default IP multicast maximum ingress bandwidth (i.e., the maximum incoming bandwidth on all
IPMS data queues used in the switch) is 10 megabits. The following subsections describe how to config-
ure a user-specified maximum ingress bandwidth value and how to restore it with the
ingress-bandwidth

Configuring the Maximum Ingress Bandwidth

You can modify the IP multicast maximum ingress bandwidth from 1 to 1000 megabits by entering
multicast max-ingress-bandwidth
mum ingress bandwidth to 20 megabits you would enter:
-> ip multicast max-ingress-bandwidth 20

Restoring the Maximum Ingress

To restore the IP multicast maximum ingress bandwidth to its default (i.e., 10 megabits) value you use the
no form of the ip multicast max-ingress-bandwidth
-> ip multicast no max-ingress-bandwidth
page 23-14
command.
followed by the new value in megabits. For example, to set the maxi-
OmniSwitch 6800 Series Network Configuration Guide
Configuring IP Multicast Switching
command by entering:
ip multicast max-
ip
November 2004