Alcatel OmniSwitch 6800 Series Network Configuration Manual page 184

Quick Steps for Configuring Static Link Aggregation
Note. Optional. You can verify your static link aggregation settings with the
example:
-> show linkagg 1
Static Aggregate
SNMP Id
Aggregate Number
SNMP Descriptor
Name
Admin State
Operational State
Aggregate Size
Number of Selected Ports : 4,
Number of Reserved Ports : 4,
Number of Attached Ports : 4,
Primary Port
You can also use the
"Displaying Static Link Aggregation Configuration and Statistics" on page 10-13
show commands.
An example of what these commands look like entered sequentially on the command line on the local
switch:
-> static linkagg 1 size 4
-> static agg 1/1 agg num 1
-> static agg 1/2 agg num 1
-> static agg 1/3 agg num 1
-> static agg 1/4 agg num 1
-> vlan 10 port default 1
And an example of what these commands look like entered sequentially on the command line on the
remote switch:
-> static linkagg 1 size 4
-> static agg 1/9 agg num 1
-> static agg 1/10 agg num 1
-> static agg 1/11 agg num 1
-> static agg 1/12 agg num 1
-> vlan 10 port default 1
page 10-4
: 40000001,
: 1,
: Omnichannel Aggregate Number 1 ref 40000001 size 4,
: ,
: ENABLED,
: UP,
: 4,
: 1/1
show linkagg port port command to display information on specific ports. See
OmniSwitch 6800 Series Network Configuration Guide
Configuring Static Link Aggregation
show linkagg command. For
for more information on
November 2004