Configuring an 802.1Q VLAN
Show 802.1Q Information
After configuring a port or link aggregation group to be a tagged port, you can view the settings by using
the show 802.1q command, as demonstrated:
-> show 802.1q 3/4
Acceptable Frame Type
Force Tag Internal
Tagged VLANS
-------------+-------------------------------------------------+
2
-> show 802.1q 2
Tagged VLANS
-------------+-------------------------------------------------+
3
To display all VLANs, enter the following command:
-> show vlan port
page 9-8
:
Any Frame Type
:
Internal Description
TAG PORT 3/4 VLAN 2
Internal Description
TAG AGGREGATE 2 VLAN 3
OmniSwitch 6800 Series Network Configuration Guide
off
Configuring 802.1Q
November 2004