Static Link Aggregation Specifications; Static (Omnichannel) Link Aggregation Default Values - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Static Link Aggregation Specifications

Static Link Aggregation Specifications
The table below lists specifications for static (OmniChannel) groups.
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6800
Series switches)
Maximum number of link aggregation groups per
standalone OmniSwitch 6800 Series switch
Number of links per group supported
Range for optional group name
CLI Command Prefix Recognition
Static (OmniChannel) Link Aggregation Default
Values
The table below lists default values and the commands to modify them for static (OmniChannel) aggre-
gate groups.
Parameter Description
Administrative State
Group Name
page 10-2
32
32
2, 4, or 8
1 to 255 characters
All static link aggregation configuration commands
support prefix recognition. (Static link aggregation
show commands do not support prefix recognition.)
See the "Using the CLI" chapter in the OmniSwitch
6800 Series Switch Management Guide for more
information.
Command
static linkagg admin state
static linkagg name
OmniSwitch 6800 Series Network Configuration Guide
Configuring Static Link Aggregation
Default Value/Comments
enabled
No name configured
November 2004