Displaying The Qos Log; Forwarding Log Events To The Console - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Configuring QoS

Forwarding Log Events to the Console

QoS log messages may be sent to a console attached directly to the switch. By default, QoS log messages
are not sent to the console. To send log events to the console, enter the following command:
-> qos log console
To disable immediate forwarding of events to the console, enter the following command:
-> qos no log console
To activate the change, enter the qos apply command. For more information about the qos apply
command, see "Applying the Configuration" on page

Displaying the QoS Log

To view the QoS log, use the
**QOS Log**
Insert rule 0
Rule index at 0
Insert rule 1
Rule index at 1
Insert rule 2
Rule index at 2
Enable rule r1 (1) 1,1
Enable rule r2 (0) 1,1
Enable rule yuba1 (2) 1,1
Verify rule r1(1)
Enable rule r1 (1) 1,1
Really enable r1
Update condition c1 for rule 1 (1)
Verify rule r2(1)
Enable rule r2 (0) 1,1
Really enable r2
Update condition c2 for rule 0 (1)
Verify rule yuba1(1)
Enable rule yuba1 (2) 1,1
Really enable yuba1
Update condition yubamac for rule 2 (1)
QoS Manager started TUE MAR 10 13:46:50 2002
Match rule 2 to 1
Match rule 2 to 2
Match rule 2 to 3
The log display may be modified through the qos log lines, qos log level, and debug qos commands. The
log display may also be output to the console through the qos log console command or sent to the policy
software in the switch (which manages policies downloaded from an LDAP server) through the qos
forward log command.
OmniSwitch 6800 Series Network Configuration Guide
21-46.
show qos log command. The display is similar to the following:
November 2004
Configuring Global QoS Parameters
page 21-15