Port Security Configuration - Alcatel OmniStack 8008 User Manual

Console Interface

Port Security Configuration

Use the Port Security Configuration screen to enable and configure port security for
the switch. Port Security allows you to configure each port with a list of MAC
addresses of devices that are authorized to access the network through that port.
--------------------------------------------------
Secure address count : 0
Port : 1
[Show]
Mode:DISABLE
Use <TAB> or arrow keys to move. <Enter> to select
Parameter
MAC Address
Secure address count
Port
[Show]
[More]
Mode
[Apply]
MAC
[Add]
[Delete]
[Clear]
2-38
Alcatel OmniStack 8008
< Port Security Configuration >
MAC Address
[More]
[Apply]
<OK>
Description
A list of the authorized MAC addresses that can access the network
through the specified port.
The number of authorized MAC addresses for the specified port.
Numeric identifier for switch port.
Displays authorized MAC addresses for the specified port.
Displays more MAC addresses for the port.
Port security can set to three states; Static, Disable, or Learning. When set
to Static, the switch will drop packets from the port if the source MAC
address does not match one of the addresses in the MAC Address list. If
set to Learning, the switch will use the last valid source address to filter
packets from the port.
Applies a change of Mode to the port.
A specific MAC address to be added or deleted from the list.
Adds a new MAC address to the current list.
Removes a MAC address from the current list.
Clears all the MAC addresses for the current port.
MAC Address
MAC : 00-00-00-00-00-00
[Add] [Delete]
[Clear]