Verifying The Spanning Tree Configuration - Alcatel OmniSwitch 6800 Series Network Configuration Manual

Verifying the Spanning Tree Configuration

Verifying the Spanning Tree Configuration
To display information about the Spanning Tree configuration on the switch, use the show commands
listed below:
show spantree
show spantree ports
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show spantree and show spantree ports commands is also
given in "Example Network Configuration Steps" on page
page 5-24
Displays VLAN Spanning Tree information, including parameter values
and topology change statistics.
Displays Spanning Tree information for switch ports, including parame-
ter values and the current port state.
5-22.
OmniSwitch 6800 Series Network Configuration Guide
Configuring Spanning Tree Parameters
November 2004