Configuring Vrrp; Vrrp Specifications; Vrrp Defaults - Alcatel OmniSwitch 6800 Series Network Configuration Manual

VRRP Specifications

VRRP Specifications
RFCs Supported
Compatible with HSRP?
Maximum number of virtual routers
Maximum number of IP addresses

VRRP Defaults

The following table lists the defaults for VRRP configuration through the
command keywords:
Description
Virtual router enabled or dis-
abled
Priority
Preempt mode
Advertising interval
VRRP authentication
In addition, other defaults for VRRP include:
Description
VRRP traps
VRRP tracking
VRRP delay
page 16-2
RFC 2338–Virtual Router Redundancy Protocol
RFC 2787–Definitions of Managed Objects for the Virtual
Router Redundancy Protocol
No
7
1 for the IP address owner; more than 1 address may be
configured if the router is a backup for a master router that
supports multiple addresses
Keyword
enable | disable | on | off
priority
preempt | no preempt
advertising] interval
authenticate | no authenticate
Command
vrrp trap
vrrp track
vrrp delay
OmniSwitch 6800 Series Network Configuration Guide

Configuring VRRP

vrrp command and the relevant
Default
Virtual routers are disabled (off).
100
Preempt mode is enabled.
1 second
Authentication is not enabled.
Default
Disabled
Enabled
45 seconds
November 2004