802.1Q Vlan Static Table Configuration - Alcatel OmniStack 8008 User Manual

802.1Q VLAN Static Table Configuration

Use this screen to create a new VLAN or modify the settings for an existing VLAN.
You can add/delete port members for a VLAN, or prevent a port from being
automatically added to a VLAN via the GVRP protocol. (Also, note that all ports can
only belong to one untagged VLAN. This is set to VLAN 1 by default, but can be
changed via the 802.1Q VLAN Port Configuration screen on page 2-47.)
Egress Ports
11111111
Untagged Ports
11111111
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
VID
VLAN Name
Status
Egress Ports
Forbidden Egress Ports
Untagged Ports
[Show]
[More]
[New]
Note: No VLANs are statically configured by default.
Alcatel OmniStack 8008
< 802.1Q VLAN Static Table Configuration >
VID VLAN Name
------------------------------
1
<APPLY>
The name of the VLAN.
Description
The ID for the VLAN currently displayed.
Range: 1-2048
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Set the entry for any port in this field to "1" to add it to the displayed VLAN, or
"0" to remove it from the VLAN.
Prevents a port from being automatically added to this VLAN via GVRP.
Set the entry for any port in this field to "1" to add it to the displayed VLAN as
an untagged port.
Displays settings for the specified VLAN.
Displays consecutively numbered VLANs.
Sets up the screen for configuring a new VLAN.
Status
Active
Forbidden Egress Ports
00000000
VID : 1
[Show]
[More]
[New]
<OK>
Configuring the Switch
<CANCEL>
| READ/WRITE
2-45