Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
G
Close the maintenance cover, and then close the
setup menu.
If the Z button is pressed once, the wiper moves
to the inner side. If the Z button is pressed
again, the print head returns to its normal
position and the menu closes.
Disposal of used wipers and wiper cleaners
"Disposal of Used Consumables" on
U
page 101
Replacing the Sliding Media
Holding Plates
When the media holding plates supplied with the
printer are deformed or damaged, be sure to replace
them with new ones.
Media holding plates available on the printer
"Options and Consumable Products" on
U
page 130
c
Important:
❏ If a deformed or damaged media holding plate
continues to be used, it may result in damage
to the print head.
❏ When replacing the insertable media holding
plates, replace both the right and left plates
with the sliding media holding plates.
Maintenance
Replacement procedure
A
Remove media, and press the P button to turn
the printer off.
"Exchanging Media" on page 44
U
B
Open the left maintenance cover and front cover.
C
Remove the target media holding plate.
Remove the sliding media holding plate in the
steps shown below.
(1) While holding the tabs of the media holding
plate on both sides, move the plate to the left
edge of the platen.
c
Important:
Be sure to remove the media holding plate
from the left edge of the platen. If the plate is
removed from the right edge, it will drop into
the printer and cause malfunction.
95
Advertisement
Table of Contents
