Epson SC-F7100 Series User Manual page 158

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
N
Pull out the adjustment paper. Bring the
adjustment paper to a position 5 cm from the
right edge of the roll core. Pass the lead edge of
the adjustment paper by the front of the media
guide bar and then insert it into the printer.
Appendix
O
Keep the adjustment paper taut and check the
positions of the white line on the platen and the
line drawn in Step 13.
If the drawn line and white line are misaligned as
shown in the illustration to the right, proceed to
Step 16. If they are aligned, proceed to Step 19.
P
Use the small hexagon wrench to loosen the 2
screws.
158