Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
W
Remove film a from the roll core.
X
Remove the left and right side of film b from the
printer.
Note:
Store film a and b with the counterweight without
creasing them. If film will be used again, remove dust and
other objects and stretch it well before using it.
Parallel Adjustment Using Tool B
The following procedure uses illustrations of the
SC-F7000 Series, but the procedure is the same for the
SC-F7200 and SC-F7100 Series.
Parts used in the following adjustment
The SC-F7200 and SC-F7100 Series includes two types
of hexagon wrenches. For parallel adjustment of the
Media Feeding Unit, use the large hexagon wrench.
Appendix
Media Feeding Unit
A
Confirm that the printer is off.
B
Open the front cover and raise the media loading
lever.
C
Use the large hexagon wrench to loosen the four
fixing screws on the rear of the printer as shown
in the illustration.
149
Advertisement
Table of Contents
