Epson SC-F7100 Series User Manual page 141

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
c
Important:
If the right holder handle shaft is not visible,
rotate the handle as shown in the illustration
below until it stops.
I
Pass film a through the roll core.
J
Insert the roll core into the left roll holder. Next,
insert the right roll holder into the roll core, and
then tighten the roll holder fixing screw.
Appendix
K
Rotate the handle until part A in the illustration
below is fully inserted.
L
Pass film a from the rear to the front.
M
While checking at the front and rear of the
printer, align film a with film b tightly.
141
a b
a
b