Epson SC-F7100 Series User Manual page 97

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
(2) While pressing the tip of the metallic plate
against the platen, attach the hooked sections
to the front corner of the platen.
E
Check that two hooked sections at the rear of the
media holding plate are securely applied as
shown below and that they are attached with no
gap between the plate and platen.
(1) Latch at the rear of square hole: Groove in front
of white line
(2) Latch at the rear of tab: Front corner of the
platen
Maintenance
c
Important:
If both hooked sections are not positioned
correctly, return to Step 3 to attach them
again. Otherwise, the head may be damaged.
F
While holding the tabs of each media holding
plate on both sides, move both the plates to the
left and right edges of the platen respectively.
Releasing the tab fixes the media holding plate.
G
Close the left maintenance cover and front cover.
97