Epson SC-F7100 Series User Manual page 84

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
F
Wipe lint, dust, and adhered ink from the platen
using a brush or soft cloth that has been soaked in
water and squeezed well.
Carefully remove lint and dust stuck in the
groove of the platen.
Maintenance
G
Wipe off the media holding plates using a soft
cloth that has been soaked in water.
Sliding media holding plates
Normally, wipe off any lint and dust that has
attached to the surface, without removing the
media holding plates.
When media with glue is used or ink has adhered
to the surface of the media holding plates,
remove the plates, and wipe stains off both the
front and rear surfaces.
When stains are removed, be sure to attach the
plates to their original positions.
Removing and attaching the media holding
plates U
Plates" on page 95
84
"Replacing the Sliding Media Holding