Table of Contents
Advertisement
6. Remove the cap on the new wiper, place it on the attachment point, and press it down until it clicks
into place.
7. Close the maintenance cover.
8. To close the setup menu on the product control panel, press the OK button to move the wiper to the
inner side.
9. Press the OK button again to return the print heads to normal position and close the setup menu.
Parent topic:
Related references
Maintenance Precautions
Consumables and Replacement Parts
Related tasks
Moving the Print Head for Maintenance
Replacing the Media Holding Plates
If the media holding plates that came with your product become damaged or deformed, you need to
replace them.
Caution: Continued use of damaged or deformed media holding plates may damage the print heads.
1. Remove any media loaded in the product and press the
Maintenance
power button to turn off the product.
146
Advertisement
Table of Contents
