Drying *2; Media Suction; Head Movement; Multi-Strike Printing - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
D
Press the y button twice to return to the
customize settings menu.
Drying (SC-F7000 Series only)
Allows you to set the drying time per pass.
A
Use the d/u buttons to select Drying and press
the Z button.
B
Select Drying Time Per Pass and press the Z
button.
When you want to maintain a constant drying
time even when the print width changes, set the
following value in accordance with the media
width.
Drying Time Guidelines by Media Width
Media width
162.56 cm
132.08 cm
111.76 cm
106.68 cm
91.44 cm
60.96 cm
C
Use the d/u buttons to change the time in
increments of 0.1 seconds.
D
After finishing the configuration, press the Z
button.
E
Press the y button twice to return to the
customize settings menu.

Media Suction

While printing, the printer uses suction to maintain the
correct distance between the media and the print head;
the amount varies with the type of media. Less suction is
used for thin media that would not print or feed
correctly at high levels of suction.
The suction power is weakened when the parameter is
lowered.
Basic Operations
Drying time (seconds)
2.3
2.0
1.8
1.7
1.6
1.3
64
A
Use the d/u buttons to select Media Suction and
press the Z button.
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.

Head Movement

Choose the range in which the print head moves during
printing.
A
Use the d/u buttons to select Head Movement
and press the Z button.
B
Use the d/u buttons to select the desired setting
and press the Z button.
For faster printing, select Data Width.
For even, high-quality printing, select Printer
Full Width.
C
Press the y button to return to the customize
settings menu.

Multi-Strike Printing

Choose the number of times each line is printed.
A
Use the d/u buttons to select Multi-Strike
Printing and press the Z button.
B
Use the d/u buttons to choose a value.
C
After finishing the configuration, press the Z
button.
D
Press the y button to return to the customize
settings menu.

Roll Type

Choose Printable Side Out or Printable Side In
according to how the media is rolled.