Epson SC-F7100 Series User Manual page 143

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
P
While checking the scale of film a at the front of
the printer, make an adjustment on the rear side
of the printer.
If the adjustment screw is turned
counterclockwise, the scale moves back. If the
adjustment screw is turned clockwise, the scale
moves towards you. One turn of the screw moves
the line about 1 mm. If the value of this scale
matches the left side, the adjustment is complete.
Q
Use the large hexagon wrench to firmly secure
the 4 screws.
Appendix
R
At the front of the printer, remove the
counterweight attached to film a.
S
Pull film a from the rear of the printer. Next,
loosen the right roll holder fixing screw, and
move away the roll holder.
T
Remove the roll core.
Next, proceed to the parallel adjustment of the Auto
Take-up Reel Unit.
143