Epson SC-F7100 Series User Manual page 154

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
c
Important:
If the left roll core handle shaft is not visible,
rotate the handle as shown in the illustration
below until it stops.
C
Tighten the roll core holder locking screw to
align the right roll core holder with the position
of dotted line.
Appendix
D
Insert the roll core into the right roll holder.
Insert the left roll core holder into the roll core,
and then tighten the roll core holder locking
screw.
E
Rotate the handle until part A in the illustration
below is fully inserted.
154