Epson SC-F7100 Series User Manual page 155

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
F
Move the adjustment paper to a position 5 cm
from the left edge of the roll core, and then insert
it into the printer. Keep the adjustment paper
taut, place a ruler on the front side of the white
line on the platen, and then draw a line with a pen
or other writing instrument.
Pass the lead edge of the adjustment paper
between the after heater and media guide bar,
and then insert it into the printer.
Appendix
G
Pull out the adjustment paper, move it to a
position 5 cm from the right edge of the roll core,
and then insert it into the printer.
Pass the lead edge of the adjustment paper
between the after heater and media guide bar,
and then insert it into the printer.
155