Front (Sc-F7000 Series) - Epson SC-F7100 Series User Manual

SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide

Front (SC-F7000 Series)

A
Maintenance cover (left)
Open this cover to clean the area around the print head. Normally closed when using the printer.
"Cleaning Around the Print Head" on page 78
U
B
Eject guide
Media is ejected along this guide.
C
Roll core holder
Place the used roll core for media take-up on these holders. There are two supports: one on the left and one on the
right.
"Media Loading (SC-F7000 Series)" on page 54
U
D
Tensioner
The media guide bar maintains tension to prevent the media sagging as it is taken up.
E
Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are two
supports: one on the left and one on the right.
F
Roll support
Rest media temporarily on these supports when removing the take-up roll. There are two supports: one on the left
and one on the right.
G
Auto switch
Use this switch to select the auto take-up direction. Choose Off to disable auto take-up.
Introduction
12