Table of Contents
Advertisement
SC-F7200 Series/SC-F7100 Series/SC-F7000 Series User's Guide
Insertable media holding plates
Remove the media holding plates and wipe stains
from the front and rear surfaces.
H
After cleaning, close the front cover.
Replacing and Refilling
Consumables
Maintenance
Chip Unit Replacement and Ink
Refills
Time Period for Chip Unit
Replacements and Ink Refills
If the Check Ink Levels message is displayed on the
control panel, the chip unit needs to be replaced soon.
Obtain an ink pack of the appropriate color as soon as
possible.
You will be unable to print if the chip unit for even one
color needs to be replaced. If the Check Ink Levels
message is displayed during a print job, you can replace
the chip unit and refill the ink while printing continues.
Ink Packs Compatible with this PrinterU
and Consumable Products" on page 130
c
Important:
This printer has a remaining ink warning system.
Use the following procedure for replacement and
ink refills to replace the chip unit and refill the ink
correctly.
This system does not directly detect the amount of
ink remaining in the ink tank. Instead, the amount
of ink remaining is estimated based on the ink
usage conditions and displayed as a message. To
maintain the accuracy of this system, you must
replace the chip unit and refill the ink as soon as
possible once the remaining ink is 70 mm or less
from the bottom of the ink tank.
Procedure for Replacement and Ink
Refills
The refill method differs depending on the type of ink.
Use the refill method that matches the type of ink.
Before performing operations, check the "Safety data
sheet"and the following notes.
You can download it at your local Epson Web site.
85
"Options
Advertisement
Table of Contents
